Rigidply Rafters, Inc. GluLam Products - Pavilions

LAMINATED BEAMS: Rigidply Rafters, Inc. double-tapered pitched curved beam, glue laminated Southern Yellow Pine.

TONGUE &: GROOVE DECKING: Nominal 2x6 tongue and groove, #1 SYP K.D. 19% m.c., installed according to AITC 112-93"combination simple and two span continuous" Section 6.4.5 and typically fastened with two sixteen penny common nails per 2x6 at each bearing location.

SUPPORT COLUMNS: Rigidply Rafters, Inc. full length treated Glue-Lam columns. Treatment to be CCA 0.60 pounds per cubic foot retention, according to AWPA C-28.

ROOFING SYSTEM: Fascia will be 2x Alaskan Yellow Cedar. Fiberglass shingles are 30 year Architectural, with synthetic roof underlayment. All roofing nails will be galvanized. Fascia and drip edge will be applied continuously along the perimeter.

HARDWARE: Steel plate material will be ASTM-A36. Steel plate to be painted with two coats of rust resistant primer or powder coated. Fasteners required for installation of decking, fascia and roofing to be included in package.

INSTALLATION: Pavilion to be constructed by an experienced contractor according to standard practices of A.I.T.C. "Timber Construction Manual" .

STANDARD SIZES AVAILABLE (WIDTH x LENGTH):

16' x 20' thru 44'	28' x 28' thru 84'	40' x 44' thru 116'
18' x 20' thru 54'	30' x 28' thru 92'
20' x 20' thru 60'	32' x 36' thru 92'
22' x 20' thru 68'	34' x 36' thru 100'
24' x 28' thru 76'	36' x 36' thru 108'
26' x 28' thru 84'	38' x 36' thru 116'

Call Rigidply Rafers, Inc. today at 717-866-6581 to discuss your Pavilion project!