Plyco Ridge Vents
- Plyco Ridge Vents are color-matched standard to your metal roofing and siding color scheme.
- Ridge Vent designs and built-in diverters help protect the building from penetration by rain and snow.
- Vents can be installed individually (10’ length) or in a continuous pattern using the hardware provided.
-
Plyco offers several ridge vent options to meet a variety of ventilation needs:
-
MWE Low Profile Vent - ideal for attic and roof system ventilation on garages, storage structures and other smaller structures.
- Provides 12 square inches of vented area per linear foot.
- Rises only 2 3/4” above the ridge.
- Optional 1/2” wire mesh can be installed for bird control.
-
MW 100-25 Low Profile Vent - ideal for attic and roof system ventilation on medium-sized structures.
- Provides 30 square inches of vented area per linear foot.
- Rises only 3” above the ridge.
- Galvanized wire mesh for bird control standard.
-
MW 100-35 Low Profile Vent - ideal for attic and roof system ventilation on larger structures, and for increased air flow in other applications.
- Provides 36 square inches of vented area per linear foot.
- Rises 5 3/4” above the ridge.
- Galvanized wire mesh for bird control standard.
-
MWE Low Profile Vent - ideal for attic and roof system ventilation on garages, storage structures and other smaller structures.
Contact us via General Info: generalinfo@rigidply.com